EVERY TOOL, BY TASK
Every capability of STREAM Terrain has its own page with what it does, the formats it reads and writes, step-by-step use and the questions people ask. They are grouped here by the job you are doing — from opening a very large DEM to reporting a stockpile, designing a bench or handing a drawing to CAD.
Open elevation models, point clouds and orthophotos of any size and look at them properly.
Native Windows DEM viewer and software: stream very large digital elevation models (GeoTIFF), then view, measure and analyze the terrain without waiting.
Open: DEM ViewerDSM software in STREAM: open and analyze Digital Surface Models — buildings and vegetation included — with volumes, cross-sections and terrain analysis.
Open: DSM SoftwareSTREAM is DTM software that builds a bare-earth Digital Terrain Model from ground-classified LAS/LAZ or GeoTIFF, then computes volumes, sections and contours.
Open: DTM SoftwareGeoTIFF viewer for Windows: open, stream and export large GeoTIFF DEMs and orthophotos, read the embedded CRS and measure on them — fully offline.
Open: GeoTIFF ViewerLAS / LAZ viewer for Windows: STREAM opens large point clouds offline, streams them in chunks, turns them into a DEM or orthophoto and measures on the result.
Open: Point Cloud ViewerOrthophoto software for large GeoTIFF files: open gigabyte-scale orthophotos, overlay them on your DEM, and measure or digitize vectors on the imagery.
Open: Orthophoto SoftwareDrone surveying software for the analysis side: turn UAV DEMs, orthophotos and LAS/LAZ point clouds into topographic surveys, contours, volumes and CAD files.
Open: Drone Mapping SoftwareTerrain streaming software: STREAM loads only the tiles you look at, so gigabyte DEMs, orthophotos and LAS/LAZ clouds open and stay responsive — fully offline.
Open: Terrain StreamingSTREAM is a 3D terrain viewer for DEMs and orthophotos: GPU-driven 3D, instant 2D/3D switch, draped imagery — native Windows, fully offline.
Open: 3D Terrain ViewerSTREAM is hillshade software that generates shaded relief from your DEM to reveal terrain shape, with adjustable sun position — native Windows, fully offline.
Open: Hillshade SoftwareTerrain flythrough video from your DEM and orthophoto: capture views, smooth the camera, add scenario transitions, export 1080p or 4K MP4 — offline.
Open: Terrain Flythrough VideoDistances, areas, cut and fill, cross-section cubature, stockpiles and survey-to-survey change — with reports.
STREAM is terrain measurement software for distance, area, elevation and volume — computed on your DEM with instant results, native Windows, fully offline.
Open: Measurement SoftwareSTREAM cut and fill software calculates earthwork volumes against real terrain, a flat level or a reference surface, with a heat map and volume report.
Open: Cut and Fill SoftwareSTREAM is cross section software: draw an axis, set the interval, and it cuts sections from your DEM — cut/fill area, a cubature table, and DXF export.
Open: Cross Section SoftwareStockpile measurement and inventory software for mines and quarries: turn a drone or LiDAR survey into volume, tonnage and a print-ready PDF report — offline.
Open: Stockpile Measurement SoftwareSTREAM's terrain change detection software compares two surveys and reports deposition, erosion and net volume ± uncertainty — fully offline, no cloud upload.
Open: Change Detection SoftwareDEM accuracy assessment: compare check points and GCPs with your surface, get RMSE, mean shift, NMAD and 95% accuracy, and export a PDF or Excel report.
Open: DEM Accuracy AssessmentSurvey report software: signable PDF reports for volumes, stockpiles, change detection, slope, pit and hydrology, plus scaled map sheets — offline.
Open: Survey Report SoftwareSlope, contours, breaklines, visibility, water and sunlight computed on the same surface.
Desktop terrain analysis software: slope, aspect, viewshed, hydrology, contours, sun & shadow and change detection, computed on your DEM as raster or vector.
Open: Terrain Analysis SoftwareSTREAM's slope analysis software turns your DEM into color-coded steepness and direction maps — live overlay or exported as raster/vector, fully offline.
Open: Slope Analysis SoftwareContour line generation software: create contours at any interval from a DEM or drone survey, plot a contour map to PDF and export editable DXF vectors.
Open: Contour Line Generation SoftwareExtract crest and toe breaklines from surveyed terrain automatically: every slope face found, lines placed on the real break, ramps separated, exported to DXF.
Open: Automatic Breakline ExtractionViewshed analysis software for Windows: compute visibility from any DEM point, check line-of-sight, and export as raster or vector — fully offline.
Open: Viewshed Analysis SoftwareHydrology software in STREAM: flow direction, accumulation, stream extraction and watershed delineation — native Windows desktop, fully offline.
Open: Hydrology SoftwareSTREAM is sun and shadow analysis software for DEM terrain: sunlight-hours maps by instant, day, month or year, with real topographic shadow, offline.
Open: Sun and Shadow Analysis SoftwareBenches, platforms, roads, blast patterns, channels and surface edits that read the surveyed terrain.
Grading software for pits, pads and spoil dumps: find the balance elevation where cut equals fill, design benched slopes, and get quantities and drawings.
Open: Grading SoftwareRoad design software that works on your own DEM: horizontal and vertical alignment, typical sections, superelevation, cross-sections, mass haul and DXF.
Open: Road Design SoftwareBlast pattern design software: lay out a drill pattern on a bench, take hole depths from the terrain, check burden relief in 3D, and export holes and drawings.
Open: Blast Pattern Design SoftwareDesign a drainage or diversion channel on surveyed terrain: profile, typical section, Manning hydraulics, freeboard and velocity checks, and setting-out.
Open: Channel Design SoftwareTerrain editing software for DEM cleanup: flatten to a designed surface, remove trees, buildings and stockpiles, and shift levels — source file untouched.
Open: Terrain Editing SoftwareTIN surface software: triangulate points and lines, edit node elevations, flip triangles, clip, check for overlaps and holes, export DXF 3DFACE or LandXML.
Open: TIN Surface SoftwareSTREAM's vector tools draw points, lines and areas that sit on the terrain, organize them in layers, snap to features and export to DXF — fully offline.
Open: Vector Drawing ToolsOpen and view DXF drawings on real terrain: import and export DXF, draw vectors that drape on the DEM, and produce cross-section drawings and contours.
Open: CAD Software for TerrainOpen pit design software: bench template, geotechnical sectors, haul ramps with cycle time, bench volumes and tonnage, push-backs and production schedule.
Open: Open Pit Design SoftwareMine surveying, block models, production tracking and permit checks for operating sites.
STREAM is mine survey software for stockpile and cut/fill volumes, cross-sections and pit change detection on large drone or LiDAR surveys — fully offline.
Open: Mine Surveying SoftwareImport a block model, intersect it with your surveyed terrain and pit design, and read ore/waste split, bench tonnage and grade — classification kept separate.
Open: Mining Block Model SoftwareMine production progress tracking: classify ground movement between dated surveys against project boundaries and design, with balance, findings, PDF and CSV.
Open: Mine Production Progress TrackingMining permit compliance software: audit excavation, dumping, stockpiles and roads against licence, EIA and cadastral boundaries; PDF, Excel and DXF reports.
Open: Mining Permit Compliance SoftwareCoordinate systems, transformations, georeferencing and the formats CAD and GIS teams expect.
Coordinate system software that reads the CRS of your DEMs, orthophotos and vectors by EPSG code — UTM, Lambert or Albers projections, WGS84 — so layers align.
Open: Coordinate System SoftwareCoordinate transformation software: move a whole project from a local grid or old datum to a national system with common points, residuals and a PDF report.
Open: Coordinate Transformation SoftwareSTREAM georeferencing software aligns DEMs, orthophotos, point clouds and CAD drawings on the same ground, from each file's embedded coordinate system.
Open: Georeferencing SoftwareExport from STREAM to DXF for CAD, GeoTIFF for GIS, CSV for tables, KMZ for Google Earth, and LandXML surfaces that carry their own CRS — plus PDF reports.
Open: Export (DXF, GeoTIFF, CSV, KMZ)Offline desktop GIS and mapping software for terrain: georeferenced DEMs, orthophotos and vectors, slope/hydrology/viewshed analysis, GeoTIFF, DXF and SHP.
Open: GIS Software